Isn't color print stock meant to compensate for the orange mask of color
negative? That would account for the blue that goes beyond what a normal 85B
filter is meant to correct for.
-Marcy
________________________________
From: Daniela Zahlner <daniela.zahlner_at_gmx.at>
To: frameworks_at_jonasmekasfilms.com
Sent: Wed, April 13, 2011 12:12:18 PM
Subject: [Frameworks] processing color print stock with E6
hei,
I tried to develop color print stock (3383) with E6.
I used the times I found in the Cherry Kino booklet:
FD 1min
CD 2min
BX 2min
stab 2min
- all 38 degrees, except stab.
it turned out a deep blue. i assumed it might be caused by using the print film
in daylight, so i made another test with a orange filter - same result. also
with a blue filter.
has anyone tried this and knows the correct times?
thanks,
daniela
--
NEU: FreePhone - kostenlos mobil telefonieren und surfen!
Jetzt informieren: http://www.gmx.net/de/go/freephone
_______________________________________________
FrameWorks mailing list
FrameWorks_at_jonasmekasfilms.com
http://mailman-mail5.webfaction.com/listinfo/frameworks
_______________________________________________
FrameWorks mailing list
FrameWorks_at_jonasmekasfilms.com
http://mailman-mail5.webfaction.com/listinfo/frameworks
Received on Thu Apr 14 2011 - 11:34:38 CDT
