From: Nicky Hamlyn (email suppressed)
Date: Mon May 12 2008 - 10:59:45 PDT
And Nowhere Lab have the film Co-op's old Debrie which has a triple
gate for bi-packing (two layers of original and one of print stock),
On 8 May 2008, at 22:35, Gregory Kurcewicz wrote:
> Pip - I'm quite amazed that you can fit so much film together in a
> sandwich like that and align it - I suppose that I shoud go and
> visit a contact printer somewhere soon.
> Auricons look very intersting - has any one else on the list used
> an Auricon? Do they still print the sound on normal stock?
> p.s thanks too to Nicky Hamlyn for help with the original question.
> Pip Chodorov wrote:
>> Hi Greg,
>> I bipacked loops of hi-con positive with color negative and raw
>> stock which worked well, and then reprinted into the travelling
>> matte with color negative and the hi-con negative. The color
>> negative and the raw stock were the same length of course, only
>> the hi-con was in short loops.
>> This was on a Debrie Matipo printer. It was my first experience
>> with it.
>> Jeff Scher got great results with an auricon.
>> Hope that helps,
>> Pip Chodorov
>> At 0:51 +0100 7/05/08, Gregory Kurcewicz wrote:
>>> Dear All - can anyone give some advice on bi-packing film? Is it
>>> best to bi-pack 5oft of film with 50ft of your original?
>>> anyone having fun with this process?
>> For info on FrameWorks, contact Pip Chodorov at <email suppressed>.
> For info on FrameWorks, contact Pip Chodorov at <email suppressed>.
For info on FrameWorks, contact Pip Chodorov at <email suppressed>.