From: Ron Toole (email suppressed)
Date: Tue Mar 27 2007 - 10:59:20 PDT
Alain you are a savior!
I followed your suggestion,
and the KEM Rapid is fixed!
It was that card.
Thank you!
Ron Toole
--- 40 Frames <email suppressed> wrote:
> > Framerverks,
> >
> > I am operating several flatbeds one of which is a
> KEM
> > 6 plate.
> >
> > It is having a difficulty. Take-up side: the white
> > transport brake does not pulling away from the
> winding
> > motor which prevents the mechanism from taking up.
> >
> > I think maybe this is a solenoid problem? but it
> has
> > happened to all 3 tracks simulataneously so am
> > disinclined to think all 3 solenoids go bad / same
> > time.
> >
> > I have tried replace all fuse; this did not solve
> > problem.
> >
> > Anyone ever have this experience before?
> >
> > Suggestions?
> >
> > Thank you in advance,
> > Ron Toole
> > San Francisco
>
>
>
> Assuming you have RS ("Rapid") style 6 plate...
>
> If brakes don't lift from the winding motor you
> likely have a problem
> with PCB #LST3.
>
>
> Troubleshoot by:
>
> *Check if power is coming to the PCB.
> *Replacing relays.
> *Test thyristors on this board and replace the bad
> ones.
> *Replace PCB for new one (Atomic Film and Eagle Eye
> for parts).
>
>
>
> -Alain
>
>
> ================
> 40 FRAMES
> Alain LeTourneau
> Pamela Minty
> 425 SE 3rd, #400
> Portland, OR 97214
> United States
>
> +1 503 231 6548
> info(at)40frames(dot)org
> http://www.40frames.org
>
>
>
__________________________________________________________________
> For info on FrameWorks, contact Pip Chodorov at
> <email suppressed>.
>
__________________________________________________________________
For info on FrameWorks, contact Pip Chodorov at <email suppressed>.